Stage 5 · Maintenance & lifespan
Maintenance & lifespan: decks die of neglect in a predictable order
First the surface greys and checks. Then fasteners loosen and boards cup. Then — quietly, underneath — the ledger and the post bases rot. The visible stages are cosmetic; the invisible one is structural. The calendar below is ordered to catch them in that sequence.
The annual inspection (30 minutes, every spring)
- Ledger and flashing: look for staining, softness, gaps opening at the house line. Probe with a screwdriver — sound wood resists, rot admits it.
- Posts and bases: check post bottoms and bracket connections; soil or mulch piled against post bases is a rot appointment.
- Guards: push hard at the top rail, at posts. Movement means the connection, not the rail, is failing.
- Stairs: stringer ends, tread fasteners, the handrail's grip and continuity.
- Surface: popped fasteners, cracked board ends at the picture frame, mould in the shaded corners (a cleaning failure, not yet a material failure).
Calendars by material
| Material | Wash | Finish cycle | Watch for |
|---|---|---|---|
| Pressure-treated pine | Yearly | Stain/sealer every 1–3 yrs | Checking, cupping, end-grain splits |
| Cedar | Yearly | Finish every 2–3 yrs (or let it silver) | Soft spots in sapwood boards |
| Composite | Yearly, soap + soft brush | None | Mould in shade; scratch care per maker |
| Capped polymer | Yearly | None | Movement gaps at butt joints |
| Ipe / hardwood | Yearly | Oil yearly to hold colour | Silvering (cosmetic); end checks |
Pressure-washing note: a fan tip held at a respectful distance cleans; a needle jet at close range carves wood fibres and raises grain that then holds dirt faster. Composite makers generally cap recommended pressure — check before renting the biggest machine on the lot.
Two cheap decisions that extend structural life
Joist tape — self-adhering membrane on top of joists before the surface goes down — keeps water out of the screw holes and the joist tops where rot starts; on a re-deck it is the highest-value hour you can buy. Ventilation: low decks need air movement underneath; skirting that seals a low deck into a damp box shortens frame life measurably. Leave the underside breathing, keep grade sloping away, and never store the yard's clutter against the skirting.
Repair or replace: the honest test
Replace boards freely — surfaces are wear parts. Replace the deck when the frame is the problem: ledger rot, multiple posts soft at the base, joists checked through at mid-span, or a footing line that has heaved differentially. A re-deck (new surface on a sound, inspected frame) costs a fraction of a rebuild and is the right job more often than either extreme — full chapter logic in the method map, symptom routing in the FAQ.